Avid Technology Live Recording, Руководство пользователя, Страница: 46 / 68

Live Recording Guide 42
Connecting Directly to the VENUE
System
When connecting directly to your VENUE sys-
tem (or if you are using an Ethernet router with-
out DHCP server functions) you must manually
set the IP addresses of the VENUE system and
the Pro Tools computer.
To connect a VENUE system to a Pro Tools
system:
1
Do either of the following:
• Connect an appropriate Ethernet cable
type (with RJ-45 connectors) from the ECx
port on your VENUE system to the Ether-
net port on your computer.
– or –
• If you are using a router, connect your
VENUE system (using the ECx port) and
the Pro Tools computer to the router with
the appropriate Ethernet cables (with RJ-45
connectors).
The type of Ethernet cable depends on the oper-
ating system of the remote computer:
Windows
To connect a Windows computer di-
rectly to your VENUE system, an Ethernet cross-
over cable is required. Alternatively, you can use
an Ethernet hub and connect standard Ethernet
cables between your VENUE system, the hub
and the remote computer.
Mac To connect a Mac computer directly to
your VENUE system, you can use either a stan-
dard Ethernet cable or an Ethernet crossover ca-
ble.
2
On your VENUE system, go to the Options
page, click the
Interaction
tab, and click the
Con-
trol Settings
button in to the Ethernet Control
section.
3
Enter a name for your VENUE system in the
System name box, and click
Apply
.
4
Click the
Network Settings
button, select
Use
the Following Address
and enter the following:
• IP address: 10.0.0.1
• Subnet Mask: 255.255.255.0
• Default Gateway: 10.0.0.1
Ethernet Control section with the Control Settings and
the Network Settings buttons
Entering a system name in the Control Settings dialog
Make a note of the number that appears in
the TCP/UDP Port box (the default number
is 29292). It must match the TCP/UDP port
number found on the VENUE tab of the
Setup > Peripherals menu in Pro Tools.
Entering IP information in the Network Settings Dialog