Avid Technology Live Recording, Руководство пользователя, Страница: 19 / 68

Chapter 3: Configuring VENUE and Pro Tools 15
7
Click
Apply
. In the dialog box that appears,
click
OK
.
The system restarts with HDx or MADI inputs
active. A history Show file of the previous con-
figuration is also created and stored in
Filing > History .
Adjusting Input Gain in MADI Input
Mode
In MADI Input mode, input channel gain is ad-
justed using the input gain encoders. Digital
gain (-20 dB to +18 dB) is available for all MADI
inputs.
When switching from active Stage inputs to
MADI Input mode, all gains for MADI input
channels are set to 0 dB.
When switching from MADI input mode to ac-
tive Stage inputs, all MADI digital gain settings
are replaced by pre-existing Stage input channel
gain settings.
Enabling Redundant Outputs
To enable redundant outputs:
1
Put your system into Config mode.
2
Go to the Options page and click the
System
tab to access the System Configuration page.
3
Click Edit .
4
Do one of the following depending on your
configuration:
• If you have two HDx cards installed, click
Enable HDx 2
, an click
Copy Stage 1
(or
Stage
for Mix Rack)
Outputs to HDx 2.
• If you have an HDx card installed in slot 1
(HDx1) and a MADI card installed in slot 2
(MADI 2), and you want to copy HDx , click
Enable MADI 2
and click
Copy Stage 1
(or
Stage for Mix Rack) Outputs to MADI 2.
• If you have a MADI card installed in slot 1
(MADI 1) and a HDx card installed in slot 2
(HDx2), and you want to copy the MADI 1
outputs to HDx 2 outputs, click
Enable
HDx2
and click
Copy Stage 1
(or
Stage
for
Mix Rack)
Outputs to HDx 1.
• If you have two MADI cards installed
(MADI 1 and MADI 2), and you want to
copy MADI 1 outputs to MADI 2, click
En-
able MADI 2 and click Copy Stage 1 (or Stage
for Mix Rack) Outputs to MADI 2.
5
Click
Apply.
Stage 1 (or Stage for Mix Rack), inputs are copied
to the second card’s outputs, and all assignable
inputs and outputs are available for each option
card.
If you want to revert to the previous configu-
ration, in the Show Folder column select the
most recent Show file from the Most Recent
Changes folder, and click Load.