Avid Technology Live Recording, Руководство пользователя, Страница: 17 / 68

Chapter 3: Configuring VENUE and Pro Tools 13
6
For each MADI card present, click the Input
Format pop-up menu and choose one of the fol-
lowing input options:
Optical Priority (default)
The optical input is au-
tomatically selected and made active when a
valid input signal is detected on the optical in-
put. If signal is being sent simultaneously to
both the optical and the coaxial inputs, only the
optical input will be active.
Optical
Only the optical input is active,
whether or not a valid MADI connection exists.
Coaxial
Only the coaxial input is active, whether
or not a valid MADI connection exists.
7
Click
Apply
. The Stage tabs in the Patchbay are
replaced by HDx or MADI tabs depending on
your configuration, and all Stage routing is pre-
served. A history Show file of the previous con-
figuration is also created and stored in
Filing > History
.
Exiting Virtual Soundcheck Mode
To exit Virtual Soundcheck mode and return to
active Stage inputs:
1
Put your system into Config mode.
2
Go to the Options page and click the
System
tab to access the System Configuration page.
3
In the Inputs section of the System Configura-
tion page, beneath Inputs 1–48 select
Stage 1
(or
Stage for Mix Rack).
4
For systems with a second Stage Rack, In the
Inputs section of the System Configuration
page, beneath Inputs 49–96 select
Stage 2
.
5
When the Apply/Discard dialog appears, click
either of the following as desired:
Apply Any gain changes made in Virtual Sound-
check mode are added to the total Stage input
gain on each channel.
Discard
Any gain changes made in Virtual
Soundcheck mode are lost and the Stage input
gain is returned to its previous value on each
channel.
For example, if you set Stage input gain for a
channel to +30 dB, then switch to Virtual
Soundcheck mode, a digital gain of +2.2 dB is
preserved in Virtual Soundcheck mode to yield
the same overall gain on that channel (because
2.2 dB of the 30 dB setting was digital gain as
compared to analog gain).
While in Virtual Soundcheck mode, if you in-
crease the digital gain on the channel by 6 dB
(to a displayed setting of +8.2 dB), and then
switch back to Stage mode, you can do one of
the following:
• Apply the gain change, yielding a Stage in-
put gain increase of 6 dB, or a final setting
of +36 dB (30+6).
– or –
• Discard the gain change, leaving the origi-
nal Stage input gain unchanged at +30 dB.
Selecting the MADI input format