16
AVG 8.5 Anti-Virus Network Edition © 2009 Copyright AVG Technologies CZ, s.r.o. All rights reserved.
2.
AVG 8.5 Anti-Virus Network Edition Installation
In order to be able to remotely install AVG on stations, you must first install AVG
8.5 Remote Administration and its components.
The whole process consists basically of two steps:
·
Components Installation
·
Deployment process
Note: It is strongly recommended that you go through the following chapters first
to get a general overview of AVG 8.5 Anti-Virus Network Edition installation
possibilities so that you can set the configuration that best suits your needs.
Especially check the
Where to Install and Deploy
and
Components Overview
chapters.
AVG 8.5 Anti-Virus Network Edition can be launched using the exe file within
the AVG Admin directory on the installation CD. Also, the latest installation
package can always be downloaded from the AVG website at
www.avg.com
, in the
Downloads section.
Before installing AVG Remote Administration visit the AVG website and
check for the latest installation file!
2.1. Components Overview
Below you will find brief overview of all components.
2.1.1. AVG Admin Server Deployment Wizard
This wizard will help you to deploy AVG 8.5 Anti-Virus Network Edition onto your
server or divide it across multiple servers.
2.1.2. AVG Network Installer
The AVG Network Installer Wizard helps you to automatically install AVG on remote
stations with only a few clicks.
2.1.3. AVG Admin Console
The AVG Admin Console is a central place for administration of your remote AVG
station installations in the network. It communicates with the AVG Admin server
and controls, processes and displays all relevant events.