Avery Weigh-Tronix HC12000, Инструкция пользователя

Страница: 72 / 80

3 Connecting Peripheral Instruments
Reflex HC Series
72
Only the commands shown below are valid in the Multi-
Connection mode.
(
α
is the name of the balances.)
[
α
]TARE Same as the operation of pressing the
key of the balance "
α ."
[ α ]T Same as the operation of pressing the
key of the balance "
α
."
[
α
]POWER Same as the operation of pressing the key
of the balance " α ."
[
α
]Q Same as the operation of pressing the key
of the balance "
α
."
[ α ] PRINT Same as the operation of pressing the key
of the balance "
α
."
[
α
]D05 Same as the operation of pressing the key
of the balance "
α
."
[
α
]D07 Same as sending the D07 command to the
balance "
α ."
[
α
]UNIT Same as the operation of pressing the key
of the balance "
α
."
[ α ]RANGE Same as the operation of pressing the key
of the balance "
α
."(Valid only for D-type)
[
α
]CAL Same operation as sending the CAL command
to the balance "
α
."
[
α
]UNIT+ Same as the state of holding down the key
of the balance "
α
."
Format of Output Data from the Balance
The output data from the balance "
α
" is performed with the
following format.
"[
α
]" data <delimiter>
Format of the load data is the same as the normal output form
( ).
Operation is not guaranteed for the data containing characters,
such as printing of date, time, and calibration document etc.
Restricted Items in the Multi-Connection Mode