Avery Weigh-Tronix HC12000 Скачать руководство пользователя страница 5

Страница: 5 / 80

Reflex HC Series

SAFETY PRECAUTIONS

To ensure safe and proper operation of the balance, observe

the following precautions.

Do not use the balance in hazardous areas.

This includes areas where the balance is exposed to dust or

flammable gases and liquids.

Use the AC adapter specified by Avery Weigh-Tronix.

To prevent electric shock, never disassemble the AC adapter.

The AC adapter is designed for indoor use. Do not use the

AC adapter in exterior environments or where it may be

splashed by water.

Ensure that the power supply voltage meets the indicated

range of the AC adapter.

Handle the balance carefully.

The balance is a precision instrument of solid design.

Do not connect peripheral devices other than those

recommended by Avery Weigh-Tronix.

The balance may not operate properly if peripheral devices

other than those specified in this manual are used. The

specifications for the RS-232C/AUX connector are described

in Section 3.2 "Personal Computer - RS-232C". Connect the

peripheral devices according to the methods described in this

instruction manual.

DO NOT disassemble the balance, accessories, or peripheral

unit.

Содержание HC12000

















































































Результаты поиска

Содержание HC12000

Отзывы:

Бренды по названию

Популярные бренды

Avery Weigh-Tronix HC12000, Инструкция пользователя

Результаты поиска

Содержание HC12000

Отзывы:

Бренды по названию

Популярные бренды