2 Menu Item Selection
Reflex HC Series
21
Once the menu items have been set based on the installation
environment and weighing purpose, it is not necessary to
select the menu items each time the balance is used. Once
the contents of the menu are set, they are stored even if the
balance is turned OFF or if the power is disconnected.
2.2
Procedure of Menu Item Selection
The menu of the HC Series balance consists of four levels.
(1) Press
the key to cycle through the items within a
menu level.
(
in the table below)
(2) Press
the
key to choose the current item or
move to the next menu level.
(
in the table below)
(3) Press
the key to move back one menu level.
(4)
Press and hold the
key to return to the mass
display.
(5)
This instruction manual identifies each menu item by a
number. For example,
, “Anti-Vibration
mode” is identified as [25].
(6)
Refer to Section 2.3 "Menu Map" or the attached
operation explanatory sheet.
Symbols in the
:
Display
Press the
key when the following symbols are flashing
to enter the associated menu.
(Calibration)
= Enters the menu related to
span calibration.
(Graphic display)
= Enters the menu related to
the graphic display, target
and check weighing.
(Environment)
= Enters the menu related to
the installation
Содержание HC12000
Страница 30: ...2 Menu Item Selection Reflex HC Series 30 Returns to flashing symbol Default settings...
Страница 79: ......
