Avery Weigh-Tronix HC12000, Инструкция пользователя

Страница: 51 / 80

2 Menu Item Selection
Reflex HC Series
51
(2) Press the key several times in the mass display
until the PCS unit is displayed.
(3) Load the container and press the key to tare the
balance.
(4) Count exactly five pieces (or 10, 20, 50, 100, or 200
pieces) of sample to be measured and load them on the
pan.
(5) Press the key.
(6) Every time the key is pressed, the display
sequentially changes as
(7) pcs pcs pcs ...
(Piece menu).
The default setting is pcs.)
Press the key when the display is equivalent to the
number of loaded pieces.
Example: If 50pcs. are loaded, press the key when
pcs is displayed. This determines the unit weight or
average weight per piece.
As sample is added or removed, the piece count (number of
pieces) is displayed.
Note:
Repeat steps 3 through 6 above when the sample or
manufacturing lot is changed.
Piece Count Menu Display Next Setting
In this example, when the key is pressed in the next PCS
menu, display starts from pcs.
2.9.4 Solid Specific Gravity Measurement
Solid specific gravity measurement refers to the measurement
of the sample (solid) weight in the air and in a liquid of known
density and the calculation of the sample density.