Avery Weigh-Tronix HC12000, Инструкция пользователя

Страница: 71 / 80

3 Connecting Peripheral Instruments
Reflex HC Series
71
Connecting Method
Example for connecting 10 units of Reflex HC series balances
to one personal computer is shown in the diagram below.
Assignment of Identification Name
In this example (10 balances connected to one computer),
assign the identification name in lower-case characters.
Since 10th character of alphabet is "j," assign "j" to the
balance closest to the personal computer, "i" to next closest
balance, and so on, back to "a."
Setting to Multi-Connection Mode
(1)
Adjust the communication menu settings of all the
balances to the specification of the personal computer,
and then, turn off the power to all balances.
(2) Start supplying the power to the whole system. Wait
until all balances display OFF.
(3) Send "[
α
] <delimiter>" from the personal computer.
α is the name of the balance next to the personal
computer. In the example above, lower-case "j."
This command is valid only one time after turning the
power ON.
Respective balances automatically enter the Multi-
Connection mode and the mass is displayed.
On this process, the name smaller than the sent
command by one, i.e. "[i] <delimiter>", is returned.
(4) This procedure completes the setting to the Multi-
Connection mode.
Command Codes in the Multi-Connection Mode
Personal computer
IFB IFB
HC [j] HC [i] HC [a]