1 Basic Operation
Reflex HC Series
18
Negative Overload
: The load on the balalnce is too
light.
The pan is not adjusted properly.
Display Overload
: This display appears if the mass
display exceeds 7 digits due to the choice of unit.
May appear after the
key is pressed while the
solid specific gravity (
•
d)or liquid specific gravity (d)
units are used.
1.6.1
Changing the Unit Display
Every time the
key is pressed, the unit display changes
sequentially among those registered in the UNIT
REGISTRATION menu.
Note:
Before a unit can be displayed it must be registered in
the UNIT REGISTRATION menu. Refer to “2.10 Unit
Registration Menu and Unit Change” for information on how to
register units.
The unit is displayed sequentially according to the order of the
UNIT REGISTRATION menu.
1.6.2
Changing the Minimum Display Digit
•
•
It is possible to decrease the resolution of the minimum
balance display by one decimal place if necessary.
(1)
Press and hold the
key for approximately three
seconds.
is displayed and the display is
decreased by one decimal place.
(2)
Press and hold the
key for approximately three
seconds.
is displayed and the display returns to
the original number of decimal places.
1.7
Maintaining and Transporting the Balance
1.7.1
Cleaning the Balance
Use a soft damp cloth containing a pH neutral detergent to
clean the balance.
Содержание HC12000
Страница 30: ...2 Menu Item Selection Reflex HC Series 30 Returns to flashing symbol Default settings...
Страница 79: ......
