Avery Weigh-Tronix E1070, Руководство по обслуживанию

Страница: 107 / 164

E1070 Service Manual 107
3.4 Service Menu
Network Scaling
When mapping signed characters, unsigned characters, signed integers, unsigned
integers, signed longs, and unsigned longs, an outbound value may be scaled up/down
depending on the division size of the scale.
Outbound Values
The following tokens may be affected by division size:
l
Gross (token 0)
l
Net (token 1)
l
Tare (token 2)
l
Peak (token 3)
l
PLU Piece Weight (token 5)
l
PLU Gross Accumulator (token 7)
l
PLU Net Accumulator (token 8)
l
PLU Tare Value (token 11)
l
PLU Lower Target Weight (token 13)
l
PLU Upper Target Weight (token 14)
l
Recipe Ingredient Target Weight (token 16)
l
Recipe Ingredient Actual Weight (token 17)
If the division size of the scale is less than 1, the value that is mapped will be scaled up
by 10X. Where X equals the number of digits to the right of the decimal point. Any
floating-point values will not be scaled up.
Example:
Token = 0 (Gross)
Type = 4 (Signed Long)
Division Size = 0.01
There are two digits to the right of the decimal point so the gross weight being set out
of the network connection will be multiplied by 102 (100). If the gross weight on the
display is 110.54, you should see a value of 11054 on the network connection.
TYPE # Data Type # of Bytes Range of Value
0 Signed Character 1 -127 to 127
1 Unsigned Character 1 0 to 255
2 Signed Integer 2 -32767 to 32767
3 Unsigned Integer 2 0 to 65535
4 Signed Long 4 -2,147,483,647 to 2,147,483,647
5 Unsigned Long 4 0 to 4,294,967,295
6 Float 4 1.0E-37 to 1.0E37