Avery Weigh-Tronix E1070, Руководство по обслуживанию

Страница: 105 / 164

E1070 Service Manual 105
3.4 Service Menu
Recipe
Ingredient
actual weight X X 17 11 Output the actual weight the of the
ingredient. Used with the BATCH
application.
Motion/Weigher
Steady X X 18 12 Output to the network to determine the
stability of the scale. 0 = MOTION -1 =
STABLE
Center of Zero/
zero balance X X 19 13 Output to the network to determine if the
scale is at Center of Zero.
0 = NOT CoZ
-1 = CoZ
Overload X X 20 14 Output to network to determine if the scale
has an OVERLOAD condition.
0 = Not O.L.
1 = O.L.
Underload X X 21 15 Output to thenetwork to determine if the
scale has an UNDERLOAD condition.
0 = Not U.L.
1 = U.L.
Input1-3 X X X X 22 16 Trigger an indicator INPUT from the network
or output the status of an indicator INPUT to
the network.
Bit0 set – input1 active
Bit1 set – input2 active
Bit2 set – input 3 active
Output 1-3 X X X X 23 17 Set the OUTPUT value from the network or
output the OUTPUT status to the network.
Bit0 set – output1 active
Bit1 set – output2 active
Bit3 set – ouput3 active
Serial number X X 24 18 Output the indicator serial number, unique
ID, to the network.
Watchdog
counter X X 25 19 Output the value of the WATCHDOG
counter to the network. Enables the operator
to verfiy scale is functioning.
Remote zero X X 26 1A Allows the network to perform a ZERO
operation. ZERO operation dependant upon
indicator configuration.
Remote tare X X 27 1B Allows the network to perform a TARE
operation. TARE operation dependant upon
indicator configuration.
Remote print X X 28 1C Allows the network to perform a PRINT
operation. PRINT operation dependant
upon indicator configuration.
Remote
accumulate X X 29 1D Allows the network to perform a ACCUM
operation. ACCUM operation dependant
upon indicator configuration.
Table 4 Tokens
Token
Inbound
to net1
Outbound
from net 1 Inbound
to net 2
Outbound
from net 2 Token
(dec.)
Token
(hex)
Description