137
5.8
Relay Setting
The I/O device must be installed to use this function.
1. Click the drop-down list and select the relay ID number.
2. Mark
Enable
to enable the selected relay. If user wants to apply the setting to all relays, click
Apply to all
button after complete the setting of the relay.
3. Click
External IO
to configure external I/O device if it is available (see also
Chapter 5.7.1
).
When external I/O is set and it will be available in drag down list for selecting.
4. The system automatically detects the card and input number. User can enter a short
description for this relay in
Description
frame.
5. In the test section, click
Test
to trigger relay.
Red
is high and
Green
is low.
6. Mark
Enable Pulse trigger
the relay will be triggered depends setting
of
Interval Time
and
Retrieve Time
.
Interval Time
is a time gap for the relay will be triggered, for example: the
relay will be triggered every 3 seconds if interval time is set to 3 seconds.
Retrieve Time
is the
time that relay is staying in trigger status, for example: when relay has been triggered and it
will continuous in trigger status for 2 second if retrieve time is set to 2 seconds.
7. Click
OK
to exit and accept the setting and
Cancel
to exit without saving the setting.
All manuals and user guides at all-guides.com
Содержание IWH5416 Touch II SB-51A05
Страница 21: ...13 6 HDD Tray Model All manuals and user guides at all guides com a l l g u i d e s c o m ...
Страница 93: ...85 Keyboards Input methods Select the keyboard or input language All manuals and user guides at all guides com ...
Страница 98: ...90 Audio Setting Adjust audio volume of system All manuals and user guides at all guides com ...
Страница 100: ...92 Phone and Modem options To setup the modem dial up settings All manuals and user guides at all guides com ...
