manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, Руководство пользователя, Страница: 89 / 170

Поделиться
Скачать
Avaya one-X Deskphone SIP 9620C Скачать руководство пользователя страница 89

9600 Series User Guide

Page 89

 Issue 08b (10 April 2014)

IP Office 9.0

Redirecting Calls:  

14.1 Follow Me

'Follow me to' is used to redirect your calls to another extension where you will be working. The calls are presented with
your user name so that they can be distinguished from calls for the extensions normal user. This allows you to share
another person's phone without logging them off their phone. 

All calls are redirected and the calls are still subject to all your user settings as if they were ringing at your phone. 

Follow Me To

'Follow me to' is the function used to enable 'follow me' from your own phone. 

Follow Me Here

'Follow me here' is the function used to enable 'follow me' at the extension to which you want your calls redirected. 

Default Short Codes

Short codes are numbers that you can dial to enable and disable various features. The following are default short codes
that may be available. However, your system administrator can remove and change the short codes available to you or
all users. 

·

Follow Me Here: *12*N# 
Dialed at the extension to which you want your calls redirected. Use your own extension number (N) when dialing
the short code. 

·

Follow Me Here Cancel: *13*N# 
Dialed at the extension from which you had redirected calls. Use your own extension number (N) when dialing the
short code.

·

Follow Me To: *14*N# 
Dialed at your phone. Dial the extension number (N) to which you want your calls redirected. You can dial just
*14# to cancel follow me. 

·

Cancel All Forwarding: *00 
Switch off any forwarding (includes 'forward unconditional,' 'forward on busy,' 'forward on no answer,' 'follow me,'
and 'do not disturb').

Содержание one-X Deskphone SIP 9620C











































































































































































Отзывы:

Нет отзывов