manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, Руководство пользователя, Страница: 52 / 170

Поделиться
Скачать
Avaya one-X Deskphone SIP 9620C Скачать руководство пользователя страница 52

9600 Series User Guide

Page 52

 Issue 08b (10 April 2014)

IP Office 9.0

8. Conference Calls

The telephone system supports multiple conference calls, with additional parties addable to any conference call until the
system's conference capacity is reached. A maximum of 64 parties in any particular conference call is supported.
Conference resources are also used for call recording and other features, reducing the available conference capacity for
ordinary conference calls. 

Some conference controls, for example dropping other parties, only apply to conferences started on the same phone
system as your extension.

Note: If you are the only internal user in the conference, depending on your telephone system's configuration, dropping
yourself might end the conference. Consult your system administrator for details. 

Default Short Codes

Short codes are numbers that you can dial to enable and disable various features. The following are default short codes
that may be available. However, your system administrator can remove and change the short codes available to you or
all users. 

·

Conference Held Calls: *47 
Start a conference between yourself and any calls that you have on hold. 

8.1 Starting a Conference

If you do not already have a held call, you can use the process below to start a conference. For more complex scenarios
see 

Context Sensitive Conferencing

. 

1. Make a call to the first party or answer a call. 

2. Press the Conf soft key. The current call is automatically put on hold. 

3. Dial the party that you want to add to the conference. 

4. If they answer and want to join the call, press Conf again. 

5. If they do not want to join the call or do not answer, press Drop and then press the appearance key of the held

call.

8.2 Adding a Call to a Conference

You can add parties to an existing conference. 

1. Press HOLD to put the conference on hold. This does not affect the other conference parties who can continue

talking to each other. 

2. Press an available appearance key on which to make a call. 

3. Dial the party that you want to add to the conference. 

4. If they answer and want to join the call, press Conf again. 

5. If they do not want to join the call or do not answer, press Drop and then press the appearance key of the held

call.

8.3 Viewing Conference Details

You can display a list of the parties involved in a conference call. 

1. If not already displayed, press the 

 up or down 

 arrow key to display the conference call. 

2. Press the Details soft key. 

·

To scroll through the list of callers in the conference, use the 

 up and down 

 arrow keys.

·

To drop a caller from the conference, highlight them and press Drop. 

·

To mute a caller, highlight them and press Mute. Repeat this to unmute them. 

·

To return to the call display, press the Back soft key. 

54

Содержание one-X Deskphone SIP 9620C











































































































































































Отзывы:

Нет отзывов