manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, Руководство пользователя, Страница: 39 / 170

Поделиться
Скачать
Avaya one-X Deskphone SIP 9620C Скачать руководство пользователя страница 39

9600 Series User Guide

Page 39

 Issue 08b (10 April 2014)

IP Office 9.0

Holding and Parking Calls:  

5.1 Holding Calls

You can hold one or more calls. 

·

The held call will still occupy the appearance button on which it was made or answered. 

·

The caller will hear music on hold. If your system does not have music on hold available, the caller will hear double
beep tones every few seconds. 

·

If you have more than one held call, or one held call and a connected call, pressing the Conference soft key will
start a conference between yourself and the calls. 

Calls that you have held will return to your phone (when idle) if they remain on hold for too long. The default return
delay is 15 seconds. Your hold recall can be changed by the system administrator. Returning calls ignore any forwarding
or do not disturb settings. 

Important - Holding Conference Calls

You can hold a conference call in the same way as holding a normal call. Holding the conference call does not affect the
other conference parties who can continue talking. You will also still be listed as a member of the conference call in the
conference details. 

Warning: This only applies to conference calls hosted by your own telephone system. Holding your call to a conference
hosted on another telephone system may cause that conference to hear your system's music on hold.  

5.1.1 Holding a Call

1. To put your current call on hold, press the Hold soft key or the call's appearance button. 

2. The held call will be indicated by its call appearance button with a fast-flashing green lamp. On phones with only a

single call appearance button (or icon), the phone displays "On-Hold" before the call information on the call's
application line.

3. While held, the caller will hear music on hold. If your system does not have music on hold available, the caller will

hear double beep tones every few seconds. 

4. You can scroll the display using the 

 up and down 

 arrow keys. The held call will appear with a 

 icon. 

5.1.2 Taking a Call Off Hold

Either of the following methods can be used to retrieve a call from hold. If you have a currently connected call, that call
will be automatically put on hold. 

1. Press the appearance button with the fast-flashing red lamp call appearance. 

2. Scroll the display using the 

 up and down 

 arrow keys, the held call will appear with a 

 icon. Press the

Connect soft key to take the call off hold.

Содержание one-X Deskphone SIP 9620C











































































































































































Отзывы:

Нет отзывов