manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, Руководство пользователя, Страница: 47 / 170

Поделиться
Скачать
Avaya one-X Deskphone SIP 9620C Скачать руководство пользователя страница 47

9600 Series User Guide

Page 47

 Issue 08b (10 April 2014)

IP Office 9.0

Transferring Calls: Transferring to Voicemail

6.2 Transferring a Held Call

There are various call transfer scenarios to consider:

1.  If you have multiple calls on hold and you want to transfer a connected call to one of the held calls:

·

Press the Transfer soft key and use the 

 up and down 

 arrow keys to select the desired call appearance.

When you are satisfied, press Complete to transfer the call while the other held call(s) remain on hold.

2.  If you have calls on hold but you want to connect your current call with a new destination:

·

Press the Transfer soft key and enter the destination manually using the numerical keypad and press
Complete. Alternatively, press Dir to 

select a destination from the directory

 or use the Redial option, if

applicable.

3.  If you have a destination call connected but you wish to refer back to the originating call before completing the

transfer:

·

Do NOT press Complete to transfer the destination call as in scenario #2. Select the originating call ('on hold
pending transfer') by pressing its call appearance button. This will place the destination call 'on hold pending
transfer' so that you can notify the originating caller.  With the originating call connected, you can now press 
Complete to connect the two calls. Held calls that are not pending transfer will not be affected. Moreover, it is
not possible to have more than one call 'on hold pending transfer.'

Note: It is also possible to transfer a held call by 

starting a conference

 and then 

dropping yourself

 from that

conference.  However, if you are the only internal user in the conference, depending on your telephone system's
configuration, dropping yourself might end the conference.

6.3 Transferring a Call to Your Mobile

If you have been configured as a mobile twinning user, you can transfer a call to your mobile device using the features
menu.

1. Press the Features soft key if shown. To do this during a call, press the 

 PHONE key and then press the

Features soft key.

      2.If necessary, use the 

 up and down 

 arrow keys to highlight Transfer to Mobile. Press Select. 

Access Control

Your system administrator can configure whether you can access this menu option. See 

Menu Access Control

. 

64

52

53

154

Содержание one-X Deskphone SIP 9620C











































































































































































Отзывы:

Нет отзывов