Avaya one-X Deskphone SIP 9620C Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 170

Avaya one-X Deskphone SIP 9620C Скачать руководство пользователя страница 36

9600 Series User Guide

Page 36

Issue 08b (10 April 2014)

IP Office 9.0

4. Redialling

The phone's redial operation can work in either of the following modes:

·

Open Call Log

If this mode is selected, pressing Redial will display a menu of the most recent outgoing calls in your call log.
You can select the call that you want to redial and perform a number of other functions.

·

Last Dialed

If this mode is selected, pressing Redial will immediately repeat the most recent outgoing call in your call log.
None of the other redial functions will be accessible.

You can

select the redial mode

that the phone uses. In either case, the redial function uses the outgoing call records

in your

personal call log

. If you delete the records in your call log, redial will not work until new outgoing call records

exist in your personal call log.

Note: Use of a centralized call log can be switched off by the system administrator. In that case the numbers used for
the redial function are stored by the phone. This guide only covers redial using outgoing call records in the user's
centralized call log.

4.1 Open Call Log Mode

This redial method is used when your phone's

redial mode

is set to List.

1. Access the redial list.

a. Press Redial. The list of outgoing calls is displayed.

b. Use the

up and down

arrow keys to scroll through the 10 most recent outgoing calls.

2. Press Call to call the number displayed in the call record.

3. Continue in the same way as for a normal dialed call.

4.2 Last Dialed Mode

This redial method is used when your phone's

redial mode

is set to One.

1. Press Redial.

2. The number for the most recent outgoing call in your personal call log is redialed.

3. Continue in the same way as for a normal dialed call.

4.3 Selecting Your Redial Mode

You can select whether your phone uses the redial list or last call redial mode.

1. Press the Features soft key if shown. To do this during a call, press the

PHONE key and then press the

Features soft key.

2. Use the

up and down

arrow keys to highlight Call Settings. Press Select.

4. Use the

up and down

arrow keys to highlight Redial Action.

5. The current mode, Open Call Log or Last Dialed is displayed.

·

Open Call Log

If this mode is selected, pressing Redial will display a menu of the most recent outgoing calls in your call log.
You can select the call that you want to redial and perform a number of other functions.

·

Last Dialed

If this mode is selected, pressing Redial will immediately repeat the most recent outgoing call in your call log.
None of the other redial functions will be accessible.

6. Press Change to change the mode.

7. When the desired mode is displayed, press Save.

36

36

36

68

36

36

36

36

«
...
34
35
36
37
38
...
»

Содержание one-X Deskphone SIP 9620C











































































































































































Отзывы:

Нет отзывов