manualshive.com logo in svg

Avaya one-X Deskphone SIP 9620C, Руководство пользователя, Страница: 75 / 170

Поделиться
Скачать
Avaya one-X Deskphone SIP 9620C Скачать руководство пользователя страница 75

9600 Series User Guide

Page 75

 Issue 08b (10 April 2014)

IP Office 9.0

Voicemail: Message Waiting Indication

12.2 Visual Voice

This menu option provides an alternate route into visual voice if the 

 MESSAGES key has not been setup to do that.

1. Press the Features soft key if shown. To do this during a call, press the 

 PHONE key and then press the

Features soft key.

2. Use the 

 up and down 

 arrow keys to highlight Visual Voice. Press Select. 

·

Depending on how your system is configured, you may be required to enter your voicemail password and then
press the Done soft key. 

3. The Visual Voice menu is displayed.

Access Control

Your system administrator can configure whether you can access this menu option. See 

Menu Access Control

. 

12.3 Checking Messages

1. Press the 

 MESSAGES button. 

·

Depending on how your system is configured, you may be required to enter your voicemail password and then
press Done. 

2. The Visual Voice menu is displayed. The numbers shown against the Listen option indicate the number of new,

old, and saved messages in your mailbox. 

·

If the system administrator has configured you to receive message waiting indication for any hunt group
mailboxes, you can also use the 

 up and down 

 arrow keys to highlight hunt group names and the number

of messages in those mailboxes. 

3. Highlight Listen and press Select. 

4. Use the 

 up and down 

 arrow keys to highlight which messages (New, Old or Saved) that you want to listen

to and press Select. The details of the first message of that type are displayed. 

5. You can use the 

 up and down 

 arrow keys to scroll through the messages. 

6. Use the soft keys to control the playback actions for the currently highlighted message: 

·

Play / Pause 
Start/stop playback of the currently displayed message. 

·

Call 
Call the person who left the message. 

·

Back
Return to the previous menu. 

·

More 
Switch between the different sets of available soft key functions. 

·

Delete 
Delete the message. 

·

Save 
Mark the message as saved. Saved messages are not normally automatically deleted.

[1]

·

Copy 
Copy the message to another mailbox. The menu will prompt you to enter the destination number. 

Automatic Message Deletion

By default, messages are automatically deleted a set time after being played. The delay depends on the particular
voicemail server (24 hours for embedded voicemail, 30 days for Voicemail Pro). For voicemail messages on a Voicemail
Pro system, the system administrator can customize the delay and can also apply automatic deletion times to new and
saved messages. 

154

Содержание one-X Deskphone SIP 9620C











































































































































































Отзывы:

Нет отзывов