Avaya one-X Deskphone Edition Скачать руководство пользователя

Страница: 57 / 74

Operational Errors and Status Messages

Issue 2 December 2007

When a line is selected, a short dial tone
burst sounds followed by a reorder/fast busy
tone.

CAUSE:

The extension is provisioned on SES

and some CM forms, but not on the
off-pbx-telephone station-mapping form. CM
does not know to map back to SES and rejects
the line reservation.

RESOLUTION:

Map the extension on the

off-pbx-telephone station-mapping form, a
sample of which appears in Appendix C of the

Avaya one-X™ Deskphone Edition for 9600
Series SIP IP Telephones Administrator Guide

CAUSE:

Possible error in SIG group

configuration on CM, which indicates the default
region for the SIP trunk to Communication
Manager.

RESOLUTION:

On the IP-network-region form,

ensure that the region pointed to is configured
with an

authoritative domain

that is the same

as the SES SIP domain. also verify that the
station in question has not been redirected to a
different network region on the ip-network map.

The HTTP/HTTPS script file and settings file
are ignored (not being used by the
telephone).

CAUSE:

The system value AUTH is set to 1

(HTTPS required) but no valid address is
specified in TLSSRVR.

RESOLUTION:

Change AUTH to 0 (zero), or

enter a valid address for TLSSRVR.

The HTTP/HTTPS
script file is ignored
or not used by the
telephone,

AND

the HTTP/

HTTPS server is a
LINUX or UNIX
system.

CAUSE:

UNIX and LINUX systems use

case-sensitive addressing and file labels.

RESOLUTION:

Verify the file names and path in

the script file are accurately specified.

AND

telephone

administration
recently changed.

CAUSE:

The

96xxupgrade.txt

file was edited

incorrectly, renamed, etc.

RESOLUTION:

Download a clean copy of the

96xxupgrade.txt

file from the Avaya support

Web site at

http://www.avaya.com/support

, and

do not edit or rename it. Customize or change

only

the

46xxsettings

file, as discussed in

Chapter 4: Maintaining 9600 Series SIP IP
Telephones

Some settings in the settings file are being
ignored while other settings are being used
properly.

CAUSE:

Improper settings file administration.

RESOLUTION:

Verify that customized settings

are correctly spelled and formatted.

Table 3: Operational Error Conditions for 9600 Series SIP IP Telephones (continued)

Condition

Cause/Resolution

4 of 5

Содержание one-X Deskphone Edition











































































Результаты поиска

Содержание one-X Deskphone Edition

Отзывы:

Похожие инструкции для one-X Deskphone Edition

Бренды по названию

Популярные бренды

Avaya one-X Deskphone Edition, Руководство по установке и обслуживанию

Результаты поиска

Содержание one-X Deskphone Edition

Отзывы:

Похожие инструкции для one-X Deskphone Edition

Бренды по названию

Популярные бренды