Avaya one-X Deskphone Edition Скачать руководство пользователя | Manualshive

Страница: 14 / 74

background image

9600 Series SIP IP Telephone Installation

14 9600 Series SIP IP Telephones Release 2.0 Installation and Maintenance Guide

Note:

Note:

For sites using headsets, the 9600 Series SIP IP Telephones support only the
HIS headset cords.

Converting Software on 9600 Series IP Telephones

9600 Series IP Telephones use either H.323 or SIP software but come from the factory with
H.323 software loaded by default. After telephone connection, you should ensure that those
telephones that will run under a SIP protocol are set up properly. This section describes how to
determine what your telephone "environment" is and then convert applicable telephones from
H.323 to SIP software, or from SIP to H.323 software.

There are several H.323 to SIP or SIP to H.323 conversion scenarios, and each scenario
depends on whether the majority of your telephones are H.323 or SIP:

●

H.323-Centric

- an environment where the majority of IP telephones are and will remain

running H.323 software, but some telephones will become SIP IP telephones. In an
H.323-centric environment, the

appropriate H.323 telephone binary files must reside on

the HTTP server and Communication Manager must be configured with the appropriate
H.323 parameters. To convert an individual telephone from H.323 to SIP, both the SIP
Enablement Services (SES) server and Avaya Communication Manager (CM) must be
configured with the appropriate SIP parameters. Any telephone in use prior to conversion
must run Release S1.2 or greater software with a SIG parameter value of “default”
(H.323). See

Table 1

, the

H.323 to SIP and SIP to H.323 Conversion Chart

for conversion

instructions.

14.

Verify that the 9600 Series IP Telephone package includes the following components:

●

1 telephone set with pre-attached stand.

●

1 handset capable of transmitting and receiving 7KHz audio.

●

1 H4DU 9-foot long (when extended) 4-conductor coiled handset cord, plugged
into the telephone and the handset.

●

1 Category 5e modular line cord for the connection from the IP telephone to the
Ethernet wall jack.

●

Avaya one-X™ Deskphone Edition for 9600 Series IP Telephones Safety
Instructions.

●

Avaya one-X™ Deskphone Edition for 9600 Series IP Telephones Stand
Instructions

.

●

Avaya one-X™ Deskphone Edition for 9600 Series IP Telephones Wall Mount
Instructions

.

15.

IP telephones ship from the factory with H.323 software. Existing installations might
also have many IP telephones running H.323 software. For instructions on how to
convert between H.323 and SIP software, see

Converting Software on 9600 Series IP

Telephones

.

«
...
12
13
14
15
16
...
»

Содержание one-X Deskphone Edition











































































Отзывы:

Нет отзывов

Похожие инструкции для one-X Deskphone Edition

DL385 - ProLiant - G5

Бренд: XenSource Страницы: 313

Lazett Combo SCX-4116

Бренд: Samsung Страницы: 165

ML 1630 - B/W Laser Printer

Бренд: Samsung Страницы: 18

S08 Voice Editor

Бренд: Yamaha Страницы: 26

MOTIF RACK Music System

Бренд: Yamaha Страницы: 37

TOOLS for MY16-mLAN

Бренд: Yamaha Страницы: 50

SmartWare R2.00

Бренд: Inalp Networks Страницы: 321

Бренд: ScanSoft Страницы: 33

8.5 ANTI-VIRUS - LINUX-FREEBSD REV 85.2

Бренд: AVG Страницы: 234

Бренд: COMPRO Страницы: 36

Бренд: Savin Страницы: 71

Universal Storage Platform VM

Бренд: Hitachi Страницы: 62

Universal Storage Platform V

Бренд: Hitachi Страницы: 102

Бренд: Hitachi Страницы: 205

Бренд: LinPlug Страницы: 46

Бренд: TRENDnet Страницы: 21

Бренд: Pfaff Страницы: 8

Бренд: Adaptec Страницы: 45

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды