Avaya one-X Deskphone Edition, Руководство по установке и обслуживанию

Страница: 50 / 74

Maintaining 9600 Series SIP IP Telephones
50 9600 Series SIP IP Telephones Release 2.0 Installation and Maintenance Guide
LANGUAGES command in the 46xxsettings file before downloading a language file with the
same filename.
Note:
Note:
Language files for 9600 Series SIP IP Telephones have a .xml filename
extension whereas language files for 9600 Series IP Telephones set to H.323
have a .txt filename extension.
The GROUP System Value
You might have different communities of end users, all of which have the same model
telephone, but which require different administered settings. For example, you might want to
restrict Call Center agents from being able to log off, which might be an essential capability for
“hot-desking” associates. We provide examples of the group settings for each of these
situations later in this section.
The simplest way to separate groups of users is to associate each of them with a number. Use
the GROUP system value for this purpose. The GROUP system value
cannot be set in the
46xxsettings file. The GROUP system value can only be set on a telephone-by-telephone basis
using a Craft procedure. To set up groups, first identify which telephones are associated with
which group and designate a number for each group. The number can be any integer from 0 to
999, with 0 as the default, meaning your largest group would be assigned as Group 0.
Then, at each non-default telephone, invoke the GROUP... Local (dialpad) Administrative
procedure as specified in Chapter 3: Local Administrative Options and specify which GROUP
number to use. Once the GROUP assignments are in place, edit the configuration file to allow
each telephone of the appropriate group to download its proper settings.
Here is an illustration of a possible settings file for the example of a Call Center with hot-desking
associates at the same location:
IF $GROUP SEQ 1 goto GROUP1
IF $GROUP SEQ 2 goto GROUP2
{specify settings unique to Group 0}
goto END
# GROUP1
{specify settings unique to Group 1}
goto END
# GROUP2
{specify settings unique to Group 2}
# END
{specify settings common to all Groups}