Avaya one-X Deskphone Edition Скачать руководство пользователя

Страница: 51 / 74

Issue 2 December 2007

Chapter 5: Troubleshooting Guidelines

Introduction

This chapter describes problems that might occur during both installation and normal operation
of the 9600 Series SIP IP Telephones and possible ways of resolving these problems.

This chapter contains the following sections:

●

Descriptions of error conditions and methods for resolving them.

●

Error and status messages, and methods for resolving them.

Error Conditions

There are three areas where installers can troubleshoot problems before seeking assistance
from the system or LAN administrator:

1. Check both the power and Ethernet wiring for the following conditions:

●

Whether all components are plugged in correctly.

●

Check LAN connectivity in both directions to all servers - DHCP, HTTP, HTTPS, Avaya
Communication Manager, and/or SIP Proxy server.

●

If the telephone is supposed to be powered from the LAN, ensure that the LAN is
properly administered and is compliant with IEEE 803.3af.

2. If you are using static addressing:

●

Use the

VIEW

Craft procedure to find the names of the files being used and verify that

these filenames match those on the HTTP/HTTPS server. See

The View Administrative

Option

on page 44 for more information. Check the Avaya Web site to verify whether the

correct files are being used.

●

Use the

ADDR

Craft procedure to verify IP Addresses. See

Static Addressing

Installation

on page 32 for information.

3. If the 9600 Series SIP IP Telephone is not communicating with the system (DHCP, HTTP, or

CM call server), make a note of the last message displayed, as described in

Table 2

and/or

Table 3

. Consult the system administrator.

4. If you expect the telephone to be IEEE-powered, verify with the LAN administrator that IEEE

power is indeed supported on the LAN.

Содержание one-X Deskphone Edition











































































Результаты поиска

Содержание one-X Deskphone Edition

Отзывы:

Похожие инструкции для one-X Deskphone Edition

Бренды по названию

Популярные бренды

Avaya one-X Deskphone Edition, Руководство по установке и обслуживанию

Результаты поиска

Содержание one-X Deskphone Edition

Отзывы:

Похожие инструкции для one-X Deskphone Edition

Бренды по названию

Популярные бренды