Avaya M770 Скачать руководство пользователя страница 83

Страница: 83 / 87

Avaya M770 ATM Manager User Guide

Counter Fields

SVC failures

The number of SVCs that have failed to be set up.

Too Long Frames

Total number of frames on the port with octet sizes
greater than the allowed value.

Total Errors

The total number of errors which have occurred on
the relevant ports.

Total Frames

The total number of frames on the ring.

Total Frames Received

The total number of frames of valid frame length
that have been received on the ports in this
module.

Total Octets

The total number of octets contained in the valid
frames that have been received on the ports in this
module.

Total Packets

The total number of packets of valid frame length
that have been received on the ports in this
module.

Total Rejected

The total number of rejected CONFIGURE requests.

Total Rx Frames

The total number of frames that have been received
on the Fast Ethernet ports.

Total Traffic

The total number of Token Ring frames processed
by the module.

Total Tx Frames OK

The number of frames of valid frame length that
have been transmitted from the Fast Ethernet
ports.

Unicast Packets

The total number of unicast packets that the
management LEC has received (In) and transmitted
(Out) for a single ATM switch on the network.

Unknown protocols In

The number of frames that the management LEC
has discarded because it did not recognize the
protocol.

VCI

Virtual Circuit Identifier. A unique numerical tag as
defined by a 16 bit field in the ATM cell header that
identifies a virtual circuit.

VPI

Virtual Path Identifier. An 8 bit field in the ATM cell
header which indicates the virtual path over which
the cell should be routed.

Содержание M770
























































































Результаты поиска

Содержание M770

Отзывы:

Похожие инструкции для M770

Бренды по названию

Популярные бренды

Avaya M770, Руководство пользователя

Результаты поиска

Содержание M770

Отзывы:

Похожие инструкции для M770

Бренды по названию

Популярные бренды