Avaya M770 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 87

background image

Appendix C

63

Avaya M770 M770 ATM Manager User Guide

Invalid ATM Address

The number of CONFIGURE requests rejected due
to the “invalid ATM address” error.

Invalid Destination

The number of CONFIGURE requests rejected due
to the “invalid destination” error.

Invalid Parameters

The number of CONFIGURE requests rejected due
to the “invalid request parameter” error.

Invalid Requester-ID

The number of CONFIGURE requests rejected due
to the “invalid requester ID” error.

LE-ARP requests

The number of responses to LAN Emulation
Address Resolution Protocol (LE_ARP) requests
that the LES has forwarded to this management
LEC (In), because the LES did not know the ATM
address. If the management LEC owns the address,
it will respond directly to the LEC that sent the
request.

The number of LE_ARP requests that the
management LEC has sent to the LES (Out),
because it needs an ATM address. If the LES knows
the ATM address, it sends it to the management
LEC. If it does not know the ATM address, the LES
forwards the address request to any proxy LECs
that are registered with it, so that they can respond
directly if they own the address.

LE-ARP responses

The number of responses to LAN Emulation
Address Resolution Protocol (LE_ARP) requests
that the management LEC has received (In) and
the number of LE_ARP requests that it has
responded to (Out).

LE_Configure error

The number of CONFIGURE requests rejected due
to the “LE_Configure” error.

LEC not recognized

The number of CONFIGURE requests rejected due
to the “LEC not recognized” error.

Malformed Requests

The number of malformed CONFIGURE requests
dropped by the LECS.

Module

The slot number of the Avaya M400 module
selected.

Multicast Packets

Total number of good packets received that were
directed to a multicast address. Note that this
number does not include packets directed to the
broadcast address.

Rx Errors

Total number of error frames received on the port.

Short Events

Total number of events on the port whose activity
duration is less than the allowed value

«
...
80
81
82
83
84
...
»

Содержание M770
























































































Отзывы:

Нет отзывов

Похожие инструкции для M770

CRD 2 00-1000S Series

Бренд: Symbol Страницы: 16

scx-4100 series

Бренд: Samsung Страницы: 8

Бренд: Harmar Mobility Страницы: 10

Бренд: Kathrein Страницы: 7

Бренд: Kathrein Страницы: 2

Бренд: Napoleon Страницы: 2

E-P2 - PEN 12.3 MP Micro Four Thirds Interchangeable Lens Digital...

Бренд: Olympus Страницы: 2

AS4000 - AS Transcription Kit

Бренд: Olympus Страницы: 24

Бренд: Obelink Страницы: 2

Бренд: REV Страницы: 2

1306 RAPID SYSTEM

Бренд: Thule Страницы: 8

Бренд: Woody Valley Страницы: 15

Бренд: Cycling Sports Group Страницы: 8

Бренд: PSF Страницы: 2

Бренд: IKAR Страницы: 72

Бренд: DYNATEK Страницы: 4

Бренд: Gira Страницы: 4

Evolion 2.1 kWh

Бренд: Saft Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды