Avaya M770 Скачать руководство пользователя страница 76

Страница: 76 / 87

Avaya M770 M770 ATM Manager User

Guid

Configuration Fields

Registration Mode

The type of LES declared to the LECS during
registration. Possible modes are:

• manual -The LECS does not support the

proprietary automatic LES address
determination method’.

• None - The LES is not registered with the

LECS.

• Prop LANE resilient - The LES will register

with the LECS using the proprietary
’automatic LES address determination
method’, and it will act as a resilient LES.

• Prop LANE distributed - The LES will

register with the LECS using the proprietary
’automatic LES address determination
method’, and it will act as a distributed LES.

Note: If the LES mode is set to ’manual’, and the
LES is moved, you will need to reconfigure the
LECS manually, so that it will find the LES.

Remote at Address

This module will advertise via ILMI the 20 byte
LECS address specified here that is located on a
remote module.

Remote at Resilient LECS

This module will advertise via ILMI the resilient
elected LECS address that is located on a remote
module.

Remote at WKA

This module will advertise via ILMI the LECS
address at the WKA which is located on a remote
module.

Remote Node Id

Node ID of the peer node.

Remote Port Number

Port number of the peer node.

Required State

The required state of the LES. Possible states are:

• up

• down

Root Virtual Port - SVC
VCI range

VCI values allowed for use on this Root Virtual
Port.

rt-VBR Admin Weight

The administrative weight given to the rt-VBR
(realtime-Variable Bit Rate) class of service, when
determining the cost of a link.

Rx Cell discards

Number of cell discards on hardware elements of
the module since the last reset.

Field

Description

Содержание M770
























































































Результаты поиска

Содержание M770

Отзывы:

Похожие инструкции для M770

Бренды по названию

Популярные бренды

Avaya M770, Руководство пользователя

Результаты поиска

Содержание M770

Отзывы:

Похожие инструкции для M770

Бренды по названию

Популярные бренды