Avaya M770 Скачать руководство пользователя страница 72

Страница: 72 / 87

Avaya M770 M770 ATM Manager User

Guid

Configuration Fields

Loopback Status

The current state of loopback on a DS3 interface.
The loopback Status contains user defined loopback
information.

MAC Address

The MAC address of the device, agent, or ring
interface.

Manual, LES at address

The address of the LES. This field is only significant
if the discovery method of the LES is set to Manual.

Max Frame Size

The maximum data frame size of supported by the
ELAN.

Max Number of Slots

Maximum number of ATM Switch modules that
can work together as a single switch within the
device.

Maximum Active LESs
(1-10)

The maximum number of LESs that can be
configured for the ELAN.

Module Type

The module type.

Name if Known

The name of the LEC that has been assigned by the
user. The name can be assigned using the Avaya
Name Server.

Neighbor ATM Address

The address of the remote interface linked to the
interface.

Neighbor Interface
Name

The name of the remote interface linked to the
interface.

Neighbor IP

The IP address of the immediate neighbor switch
that the VC passed through or of the end station
where the VC terminates.

Neighbor Sys Name

The name of the remote device linked to the
interface.

Node ATM Address

The ATM address of the PNNI node. This may be
important when the node acts as a PNNI border
node and/or a PNNI Peer Group Leader.

Node ID

The value the switching system is using to
represent the node.

The Node ID can only be changed when the
Administration Status of the node is down.

For the lowest level, the Administration Status
cannot be down. Therefore, any change to the
Node ID is only effective after the device is reset.

Node Index

A unique number identifying the node. Possible
values are between 1 and 5.

Field

Description

Содержание M770
























































































Результаты поиска

Содержание M770

Отзывы:

Похожие инструкции для M770

Бренды по названию

Популярные бренды

Avaya M770, Руководство пользователя

Результаты поиска

Содержание M770

Отзывы:

Похожие инструкции для M770

Бренды по названию

Популярные бренды