Avaya M770 Скачать руководство пользователя страница 78

Страница: 78 / 87

Avaya M770 M770 ATM Manager User

Guid

Configuration Fields

State

The state of the summary address indicates
whether or not it is advertised.

• Advertising - This summary is being

advertised.

• Suppressed - This summary is not being

advertised.

• Inactive - No addresses fall under this

summary.

State Unchanged for

The amount of time measured in days, hours,
minutes, and seconds, that the LEC’s state
regarding the LES has not changed. For more
information, refer to

Current State

on page 66.

Status

Resilient status and link status of the selected LES.

Summary Address

Summary of ATM addresses that are connected to
this node. The Summary Addresses may be
advertised throughout the PNNI domain.

Suppress

The state of summary address advertising. Possible
states are:

• on - The summary is not advertised, and all

addresses that fall under this summary are not
known in the PNNI domain.

• off - The summary is advertised.

SVC p2mp Leaf

The number of point-to-multipoint leaf SVCs
currently established on this port.

SVC p2mp Root

The number of point-to-multipoint root SVCs
currently established on this port.

SVC p2p Calling in

The number of point-to-point SVCs that where
established from the line into the switch.

SVC p2p Calling out

The number of point-to-point SVCs that where
established from the switch to the line.

SVC VCI Range

The signaling VCI range assigned to a virtual port.
The SVC VCI range is between 32 - 1023.

System Contact

Individual responsible for maintenance of the
device.

System Description

A description of the type of system being used.

System Location

The physical location of the device.

System Name

Logical name of the system as defined on the SNMP
agent of the device.

Field

Description

Содержание M770
























































































Результаты поиска

Содержание M770

Отзывы:

Похожие инструкции для M770

Бренды по названию

Популярные бренды

Avaya M770, Руководство пользователя

Результаты поиска

Содержание M770

Отзывы:

Похожие инструкции для M770

Бренды по названию

Популярные бренды