© 2016 Avaya Inc. All rights reserved. NDA Confidential; use pursuant to your agreement.
Release Notes for Avaya Scopia® XT Series
Known Issues | 77
not work properly if its field
'Echo canceller' was set to
'Yes'.
QC#16369
When restoring the system
to factory default settings,
the screen may appear black
for a long time.
QC#16506
Cancelling the screen saver
while it is activating can
cause the camera to move.
QC#20697
SI #161991: [Executive]
Sometimes the XT Control
application could not realize
the changes applied into the
Windows OS Screen
Resolution menu.
Close the XT Control application before any
changes are going to be applied into the
Windows OS menu Control Panel > Display >
Screen Resolution.
Analog/Digital DVI PC
resolution 1280x960 could
be treated as 720p or 1080p
(encoding/detected format).
QC#20566
SI #161841: [Executive]
XTE240 local PC video could
flash when the PC user
moves between different PC
active applications and the
XTE is configured to be the
'Extended'/Second Monitor
of the PC.
This issue belongs to the Windows ('Aero')
preview feature when selecting/moving
between different/open PC application
windows and could appear with any third
party 'Extended'/Second PC Monitor.
RVXT5000-615
Audio
transmission/reception
could be choppy when using
USB headset connected to
upper USB port.
Connect USB headset to lower USB port.
QC#25198
Sometimes the system is
turned on but the camera
image is not present. This is
more frequent using the XT
camera switch, for the first
camera.
Unplug and then pug again the Camera power
connector or use a Flex/Deluxe camera.
QC#24231
Issue with an input of XT
camera switch due to noise
on this input in no video
signal conditions.
Disable unused video inputs on the XT
XT7000 Series
The information about the
HD1/HD2 cameras or audio
inputs are available only for
the last selected HD1/HD2
input
Select the HD1 or HD2 input to see its
diagnostic info.
RVXT5000-1202
[XT4300] When upgrading to
this version, Flex camera
presets assigned using
8.3.2.56 are lost and must be
configured again.
In order to speed up PTZ to camera presets
with XT Flex Camera a brand new approach
has been implemented since 8.3 FP2. This new
implementation significantly improves
customer experience. Please note that when
updating to such new firmware version all
previously set presets will be lost and must be
re-configured.
When connecting different
model camera in daisy chain
there could be some
configuration trouble about
In order to avoid any trouble, configure right
driver for any camera, then turn off the
system, connect cables according to the
configuration and then turn on the system.
