© 2016 Avaya Inc. All rights reserved. NDA Confidential; use pursuant to your agreement.
Release Notes for Avaya Scopia® XT Series
What’s New | 38
Figure 57:
Default Layout in a Call with no Presentation
And when you send a presentation, the codec unit will automatically show this layout (presentation
in the big window and remote video in the small window), if you did not change the MultiImage
position in the meantime.
Figure 58:
Default Layout in a Call with Presentation
To change the number or the dimension of the windows or to change what is visualized in each
window, you need to use the remote control (Layouts or pip key) or to use the Layouts menu on the
XT GUI.
So for instance you can remove the small window with the remote video over the presentation to see
this layout:
Figure 59:
Changed Layout for Presentation
Or you can decide that you prefer to see the presentation you are sending on your pc and you want
just see the remote video and the local camera on the XT, with this layout:
Figure 60:
Changed Layout for Presentation
Once the call is disconnected or the presentation is stopped and started again in the same call, the
layout you manually selected is forgotten, and the default one is proposed again.
In this version, you can configure the XT to remember your favorite layouts, in
[GUI]
C
ONFIGURE
>A
DVANCED
>S
YSTEM
>C
USTOMIZATION
[W
EB
]
A
DMINISTRATOR
S
ETTINGS
>
S
YSTEM
>C
USTOMIZATION