background image

© 2003 Avaya Inc.
All Rights Reserved.

Notice

While reasonable efforts were made to ensure that the information in this 
document was complete and accurate at the time of printing, Avaya Inc. 
can assume no liability for any errors. Changes and corrections to the 
information in this document may be incorporated in future releases.

Preventing toll fraud

"Toll fraud" is the unauthorized use of your telecommunications system 
by an unauthorized party (for example, anyone who is not a corporate 
employee, agent, subcontractor, or person working on your company's 
behalf). Be aware that there may be a risk of toll fraud associated with 
your system and that, if toll fraud occurs, it can result in substantial 
additional charges for your telecommunications services.

Avaya fraud intervention

If you suspect that you are being victimized by toll fraud and you need 
technical assistance or support, call Technical Service Center Toll Fraud 
Intervention Hotline at +1-800-643-2353 for the United States and 
Canada. For additional support telephone numbers, see the Avaya Web 
site:

http://www.avaya.com

 

Select 

Support

, then select

 Escalation Lists

. This Web site includes 

telephone numbers for escalation within the United States. For escalation 
telephone numbers outside the United States, select 

Global Escalation 

List

.

Providing telecommunications security

Telecommunications security (of voice, data, and video communications) 
is the prevention of any type of intrusion to (that is, either unauthorized or 
malicious access to or use of) your company's telecommunications 
equipment by some party.
Your company's "telecommunications equipment" includes both this 
Avaya product and any other voice/data/video equipment that could be 
accessed via this Avaya product (that is, "networked equipment").
An "outside party" is anyone who is not a corporate employee, agent, 
subcontractor, or person working on your company's behalf. Whereas, a 
"malicious party" is anyone (including someone who may be otherwise 
authorized) who accesses your telecommunications equipment with 
either malicious or mischievous intent.
Such intrusions may be either to/through synchronous (time-multiplexed 
and/or circuit-based) or asynchronous (character-, message-, or 
packet-based) equipment or interfaces for reasons of:

Use (of capabilities special to the accessed equipment)

Theft (such as, of intellectual property, financial assets, or 
toll-facility access)

Eavesdropping (privacy invasions to humans)

Mischief (troubling, but apparently innocuous, tampering)

Harm (such as harmful tampering, data loss or alteration, 
regardless of motive or intent)

Be aware that there may be a risk of unauthorized intrusions associated 
with your system and/or its networked equipment. Also realize that, if 
such an intrusion should occur, it could result in a variety of losses to your 
company (including, but not limited to, human and data privacy, 
intellectual property, material assets, financial resources, labor costs, and 
legal costs).

Your responsibility for your company's telecommunications 
security

The final responsibility for securing both this system and its networked 
equipment rests with you, an Avaya customer's system administrator, 
your telecommunications peers, and your managers. Base the fulfillment 
of your responsibility on acquired knowledge and resources from a 
variety of sources, including, but not limited to:

Installation documents

System administration documents

Security documents

Hardware-/software-based security tools

Shared information between you and your peers

Telecommunications security experts

To prevent intrusions to your telecommunications equipment, you and 
your peers should carefully program and configure:

Your Avaya-provided telecommunications systems and their 
interfaces

Your Avaya-provided software applications, as well as their 
underlying hardware/software platforms and interfaces

Any other equipment networked to your Avaya products.

Warranty

Avaya Inc. provides a limited warranty on this product. Refer to your 
sales agreement to establish the terms of the limited warranty. In 
addition, Avaya’s standard warranty language, as well as information 
regarding support for this product, while under warranty, is available 
through the following Web site:

http://www.avaya.com/support

 

Link disclaimer

Avaya Inc. is not responsible for the contents or reliability of any linked 
Web sites and does not necessarily endorse the products, services, or 
information described or offered within them. We cannot guarantee that 
these links will work all of the time and we have no control over the 
availability of the linked pages.

Trademarks

All trademarks identified by the 

®

 or ™ are registered trademarks or 

trademarks, respectively, of Avaya Inc. All other trademarks are the 
property of their respective owners. 
Avaya, CONVERSANT, CustomerQ, DEFINITY, DefinityOne, 
MultiVantage, Nabnasset, Quintus, and WebQ are registered trademarks 
or trademarks of Avaya Inc. in the United States or other countries or 
both.

Ordering information: Avaya Publications Center
Voice

:

+1-207-866-6701
1-800-457-1764 (Toll-free, U.S. and Canada only)

Fax:

+1-207-626-7269
1-800-457-1764 (Toll-free, U.S. and Canada only)

Write

:

Globalware Solutions
200 Ward Hill Avenue
Haverhill, MA 01835 USA
Attention: Avaya Account Manager

Web:

http://www.avayadocs.com

 

E-mail:

[email protected]

 

Order

:

Document No. 585-248-220, Issue 2.1
August 2003

Avaya support

Avaya provides a telephone number for you to use to report problems or 
to ask questions about your contact center. The support telephone 
number is 1-800-242-2121 in the United States. For additional support 
telephone numbers, see the Avaya Web site:

http://www.avaya.com

 

Select 

Support

, then select

 Escalation Lists

. This Web site includes 

telephone numbers for escalation within the United States. For escalation 
telephone numbers outside the United States, select 

Global Escalation 

List

.

Avaya Training

Avaya provides training for Avaya Operational Analyst. For more 
information, contact Avaya University at:

Web site: 

http://www.avaya-learning.com/logon_form.asp

 

E-mail address: [email protected] 
US telephone: 1-800-288-5327
Outside US telephone: +1-303-406-6089

Comments

To comment on this document, send e-mail to 

[email protected]

.

Acknowledgment

This document was written by the CRM Information Development group.

Содержание Interaction Center











































































































































Отзывы: