manualshive.com logo in svg

Avaya INDeX 30, Установка и обслуживание, Страница: 5 / 53

Поделиться
Скачать
Avaya INDeX 30 Скачать руководство пользователя страница 5

Preparing for Installation

 Space Requirements - Page 5

Installation & Maintenance

  Preparing for Installation - Page 5

INDeX 30

38DHB0002UKDF- Issue 4 (07/2001)

Space Requirements

Check that the planned location meets the following requirements.
–

Height :

 1400 mm Min, which allows 500 mm above and below the cabinet.

–

Width :

 550 mm Min, which allows 50 mm each side of the cabinet.

– Allow a minimum clearance of 50mm to the left and right of the cabinet.
– Allow for trunking to the lower-right corner of each cabinet.
– Check there is suitable lighting for installation, system programming and future

maintenance. Similarly check that there is sufficient working space for

installation and future maintenance.

– Check that there is sufficient space for any addition of peripheral equipment, e.g.

Voice and ACD Manager systems and other Server PC products.

– Ensure that likely activities near the system will not cause any problems, e.g.

access to and maintenance of any other equipment in the area.

Содержание INDeX 30






















































Отзывы:

Нет отзывов