manualshive.com logo in svg

Avaya INDeX 30, Установка и обслуживание, Страница: 37 / 53

Поделиться
Скачать
Avaya INDeX 30 Скачать руководство пользователя страница 37

Maintenance

  Database Download - Page 37

Installation & Maintenance

  Maintenance - Page 37

INDeX 30

38DHB0002UKDF- Issue 4 (07/2001)

Database Download

You can download the database from the system onto the programming PC. You

can then upload the database file onto another system for study or keep it as a long

term archive copy. It is 

strongly recommended

 that you make a back-up disc of the

downloaded database (use any of the freely available compression utilities to reduce

the file size before copying to disc. A copy disc should be stored on-site.

– Note: 

Downloading the database does not take the IVM Lite prompts and

messages. To download the voice prompts and messages, use the following

instructions for FTP Database Download, but use the file name 

vs

 instead of 

db

.

Downloading with Kermit is not recommended, but if used, then select

Download

 from 

System | IVM Lite

.

FTP Database Download

1. Start your command line FTP program.

– In Windows 95, 98 and NT, select 

Start | Run

 and enter 

ftp

.

2. Enter 

open 

n

 where 

n

 is the IP address of the INDeX. 

3. When requested enter your username. 
4. When requested enter your password.
5. Enter 

bin

 to ensure that FTP file transfers user binary mode.

6. Enter 

hash

 if you want a visual indication of the transfer of data packets.

7. Enter 

get db 

fn

 where 

fn

 is the file path to save the database file to.

8. Enter 

quit 

to end the FTP connection.

Содержание INDeX 30






















































Отзывы:

Нет отзывов