Maintenance Reports
Equipment Fault Report - Page 33
Installation & Maintenance
Maintenance Reports - Page 33
INDeX 30
38DHB0002UKDF- Issue 4 (07/2001)
Equipment Fault Report
The system collects details of equipment faults during normal operation. It can
output these faults either later as a fault report or when they occur as a real-time
fault log.
The system loses all fault details following a system reset. Some false faults are
generated during a normal power-up. It is sensible to clear these using the
Clear
faults
command after starting the system.
To print a fault report :
1. From the
Administration
menu, select
Reports
and then
Fault Report
.
2. Use
the up and down cursor keys to select the port on which to output the
report.
3. Select
Print faults
and enter either a device directory number or
*
for all device
faults.
To clear all stored faults :
1. From the
Administration
menu, select
Reports
and then
Fault Report
.
2. Select
Clear faults
and enter either the directory number of the device or * for
all device faults.
Fault Codes
Each line on the fault report or log has the following parts:
–
Site Code :
The sites network node number.
–
Prefix :
Fixed as "
ALM
"
–
Fault Priority :
1
= Major alarm,
2
= minor alarm,
3
= warning,
4
= information
(e.g. alarm cleared).
–
Fault Code:
Code
Description
14
ISDN frame synchronisation lost.
20
Extension disconnected/failed.