Avaya IG550, Установка и настройка

Страница: 105 / 196

Issue 2 January 2008 105
Note:
Note:
The ge-0/0/0 port number is typically reserved for services access.
●
set system name-server <IP_address>
where
<IP_address>
is the address of a DNS server on the LAN/WAN
● set system services ssh root-login allow
to allow access to the router with
ssh. This command is optional, based on customer requirements.
● set system services telnet
to allow access to the router with telnet. This
command is optional, based on customer requirements.
● set system host-name <host-name>
where
<host-name>
is the name of the router to be accessed on the LAN or WAN
●
set system domain-search <domain_name>
where
<domain-name>
is the name of the network or subnetwork of the router
● set system time-zone <time-zone>
where
<time-zone>
is the name of the time zone, identified by continent and city. Use
the
?
option at the end of the command to see the list of time zones.
● set system ntp server <IP_address>
where
<IP_address>
is the address of an NTP server for time synchronization.
●
set interface lo0 unit 0 family inet address
<IP_address>
where
<IP_address>
is the loopback address of the router. The default is 127.0.0.1/32 .
Tip:
Tip:
To delete a configuration setting, type the relevant command but replace
set
with
delete
. For example, to delete the NTP server setting which you
configured using the
set system ntp server
command, type
delete
system ntp server
.
6. To review the configuration, type
show configuration | display set
, and press
Enter .
7. At the prompt, type
commit
.
The system commits the commands and resets. This process may take up to 10 minutes.