manualshive.com logo in svg

Avaya IG550, Установка и настройка, Страница: 121 / 196

Поделиться
Скачать
Avaya IG550 Скачать руководство пользователя страница 121

Issue 2 January 2008

121

 

!

CAUTION:

CAUTION:

The two DB-9 adapters look the same, but they are 

not

. 

Do not

 use the router 

adapter 

nor

 the Ethernet cable to connect to the TGM550. Additionally, 

do not

 

use the TGM550 adapter 

nor

 its rollover cable to connect to the router. If you use 

the wrong cable or adapter, you may damage the console port. As a result, it is 
strongly recommended that you use a permanent marker to label the cables and 
adapters as soon as you remove them from the packaging.

2. Label the DB-9 adapter and the flat rollover cable for the TGM550 to say “TGM550”. Label 

the DB-9 adapter and Ethernet cable for the router console to say “router.”

3. Verify that the equipment matches the packing list.

4. Verify that the equipment matches the list of equipment from the project manager.

Verifying the router has the power for the TIMs and PIMs

The J-series routers have limits on the power they can expend on TIMs and PIMs and still 
maintain normal operation. Verify that the project manager, sales representative, or sales 
engineer has ordered the appropriate quantity and types of TIM and PIM modules for the router 
you are installing.

If the power required of the TIMs and PIMs has not yet been calculated, see "TIM and PIM limits 
based on heat and power used by the IG550" in 

Overview of the Avaya IG550 Integrated 

Gateway

, 03-601548.

Turning off the J-series router 

1. Press and release the power button to turn off the router (

Figure 12 

).

The router begins gracefully shutting down the operating system and then powers itself off.

Содержание IG550





































































































































































































Отзывы:

Нет отзывов