Avaya Ethernet Routing Switch 8300, Руководство по установке, Страница: 90 / 96

Table 30: Pin assignments: 8393 SF/CPU module management port
Connector Pin number Signal
1 Output transmit data + (TX+)
2 Output transmit data - (TX-)
3 Input receive data + (RX+)
6 Input receive data - (RX-)
4, 5, 7, 8 Not used
8393 SF/CPU Console serial port
The console serial port is a male DB-9 connector. This port operates as a data communication
equipment (DCE) device. Default settings for this port are 9600 bits/s, 8 data bits, no parity,
and one stop bit.
The console port supports no inbound flow control; that is, the port does not switch control
lines to indicate an input buffer full condition.
The following table lists the pin assignments for the console port.
Table 31: Pin assignments: 8393 SF/CPU module console port
Connector Pin number Switch position
1 No connection
2 TXD (Output)
3 RXD (Input)
4 No connection
5 GND
6 No connection
7 No connection
8 No connection
9 No connection
8394 SF/CPU module
The following table provides specifications for the 8394 SF/CPU module.
Technical specifications
90 Installation — Modules May 2011