manualshive.com logo in svg

Avaya Ethernet Routing Switch 8300, Руководство по установке, Страница: 63 / 96

Поделиться
Скачать
Avaya Ethernet Routing Switch 8300 Скачать руководство пользователя страница 63

3. Route the cable to the termination panel, loosely fastening the cable with velcro

straps or sheet fiber along the path.

4. Fasten the connector onto the termination panel end of the cable. Use the

instructions supplied with the connector. If you use cables manufactured by Avaya,

the connectors are already fastened to the predetermined lengths of cable.

5. Label the unconnected end of the cable with the node identifier (from site records),

the shelf, the cage, the slot, and the port number.

6. When all the transmitting cables from the same module are connected to the

termination panel, use velcro straps or sheet fiber wrapped around the cables to

manage them.

7. Use scissors to cut a section of the sheet fiber that is wide enough to wrap around

the cables.

8. Round the corners of the sheet fiber section and secure it using lacing cord or tie

wraps as shown in the following figure.

Connecting and managing cables

Installation — Modules

May 2011     63

Содержание Ethernet Routing Switch 8300

































































































Отзывы:

Нет отзывов