Avaya Ethernet Routing Switch 8300 Скачать руководство пользователя страница 50

Страница: 50 / 96

Label

Color/State

Meaning

Amber/Steady

The port has either no optical signal or no link
synchronization.

Off

The port is not enabled.

Switch Usage (SF)
(3 LEDs)

Green

The lit LED type indicates the usage level of the
switch fabric as follows:
High LED = 67% and higher
Medium LED = 33–67%
Low LED = up to 33%

CPU Usage (3
LEDs)

Green

The lit LED type indicates the level of CPU activity
as follows:
High LED = 67% and higher
Medium LED = 33 - 67%
Low LED = up to 33%

Power Supply (PS)
1, 2, 3

Green/Steady

The specified power supply is operating normally.

Amber/Steady

The specified power supply has a fault.

Off

A power supply is not in the specified bay, or the
power supply in the specified bay is not on.

Temperature
(Temp)

Green/Steady

The temperature is normal for switch operation.

Amber/Steady

The maximum operating temperature is
exceeded.

Master

Green/Steady

The CPU subsystem on the module is performing
diagnostics.

Green/Blinking

This module is providing active CPU functions for
the switch and is the master CPU module.

Amber/Steady

The CPU subsystem is in a fault state.

Off

The CPU subsystem on the module is up and is in
standby mode.

Fan 1, 2

Green/Steady

The specified fan is operating normally.

Amber/Steady

A fan tray is not in the specified slot, is not on, or
failed.

Module Online

Green/Steady

The switch fabric portion of the module is online
and is load-sharing.

Amber/Steady

The module is booting and initializing the
hardware.

Off

The switch power is off, or the switch fabric portion
of the module is offline.

Ethernet Routing Switch 8300 module fundamentals

50 Installation — Modules

May 2011

Содержание Ethernet Routing Switch 8300

































































































Результаты поиска

Содержание Ethernet Routing Switch 8300

Отзывы:

Avaya Ethernet Routing Switch 8300, Руководство по установке, Страница: 50 / 96

Результаты поиска

Содержание Ethernet Routing Switch 8300

Отзывы: