manualshive.com logo in svg

Avaya Ethernet Routing Switch 8300, Руководство по установке, Страница: 28 / 96

Поделиться
Скачать
Avaya Ethernet Routing Switch 8300 Скачать руководство пользователя страница 28

Type

Label

Color/State

Meaning

Amber/Blinking

The port is transmitting data with
error.

Off

The port is disabled.

RX

Green/Steady

The port established a link and is
enabled.

Amber/Steady

The cable is disconnected, the port
is disabled, or the link is down.

Green/Blinking

The port is receiving data.

Amber/Blinking

The port is receiving data with error.

Off

The port is disabled.

Module

Online

Green/Steady

The module completed hardware
and software initialization and is
operating normally.

Amber/Steady

The module is booting and initializing
the hardware. If the condition
persists, the steady amber light
indicates that the module failed the
initialization self-test.

Off

The switch power is off. This
condition can also indicate that the
module is not receiving sufficient
power from the switch (for example,
a card fault exists or the card is not
fully plugged in).

8348GB module

The 8348GB module supports standards-based 1000 Mbit/s. Avaya has approved the SFP
transceivers for use in 8348GB module.

The 8348GB module provides 48 1000BASE-X (SFP) ports. You can use the ports on the SFPs
to make riser connections, server attachments, or interswitch links.

The following figure shows the location of the 8348GB module LEDs.

Ethernet Routing Switch 8300 module fundamentals

28     Installation — Modules

May 2011

Содержание Ethernet Routing Switch 8300

































































































Отзывы:

Нет отзывов