Avante Alta V10, Руководство по эксплуатации, Страница: 9 / 91

7.3.8 Set pressure support level 61
7.3.9 Set Apnea time 62
7.3.10 Set inspiratory pause 62
7.3.11 Set Rise Time 62
7.3.12 Set Expiratory trigger sensibility 62
7.4 Start To Mechanical Ventilation 62
7.5 Parameters Monitoring 62
7.5.1 FiO
2
monitoring 62
7.5.2 Pressure Monitoring 62
7.5.3 Tidal Volume Monitoring 63
7.5.4 Breath Rate Monitoring 63
7.5 Pulmonary function 63
7.6 Alarm setup 63
Chapter 8 Alarms 64
8.1 Introduction 64
8.2 Alarm 64
8.3 Alarm Levels 64
8.4 Alarm Indicators 65
8.5 Silence Alarms 65
8.6 Alarm message 65
Chapter 9 Cleaning and disinfection 68
9.1 Clean and Disinfect the Anesthetic Machine housing 68
9.2 Disassembling the breath system 69
9.2.1 Remove the oxygen sensor 69
9.2.2 Remove the flow sensor 69
9.2.3 Remove the breath circuit 69
9.2.4 Remove the Bag Arm 69
9.2.5 Remove the bellows Assembly 69
9.2.6 Remove the absorber canister 69
9.3 Cleaning& disinfection and Re-install the CO2 Circle Absorber and bellow 70
9.3.1 Re-install the CO2 Circle Absorber 71
9.3.2 Re-install the bellows assembly 71
9.3.3 Re-install the Bag Arm 71
9.3.4 Re-install the Airway pressure gauge 71
9.3.5 Re-install the oxygen sensor 71