Figure 6-21
Standby screen
In standby status, the following changes occur to the system:
⚫
Displaying monitored parameters and waveforms is disabled. The system is in standby status.
⚫
The ventilator stops to deliver gases.
⚫
The parameters can be set. When the standby status exits, the system will operate based on
the final settings in standby status.
⚫
The patient data can be defined,
When the patient height and type have been defined, the
ventilator settings of tidal volume, minute volume and respiration rate will change, in
accordance with the patient data.
There are three kinds of patient size to select:
⚫
Adult
⚫
Pediatric
⚫
Neonatal(optional)
To exit standby, push the [Start Ventilation] button in standby mode.
NOTE
⚫
The patient type and height can be changed when the anesthesia ventilator is in standby
mode only.
6.7.2 Normal Screen
The following figure shows the normal screen.