AVANT 225 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 84

AVANT 225 Скачать руководство пользователя страница 73

Avant 220/225

73

Engine fuses

Engine main fuse is located on the left side of engine
compartment, near battery disconnect switch:

Hydraulic oil cooler fan fuse

The  red  indicator  on  the  dashboard  indicates  blown
hydraulic  oil  cooler  fan  fuse.  If  the  indicator  is  lit,
check  the10  A  fuse  of  the  oil  cooler  fan.  Check  the
cooler  fan  can  rotate  freely  and  is  not  blocked.
Contact Avant service if necessary.

Jump start and auxiliary power

The  engine  can  be  started  with  auxiliary  power  if
necessary,  by  using  appropriate  (strong  enough)
jump  start  cables  that  are  connected  to  the  battery.
Alternatively, a separate start booster with its internal
battery  can  be  used,  refer  to  its  instructions  about
correct use.

Connect  first  one  end  of  the  positive  cable  to  the
positive  (+)  post  of  the  dead  battery.  Then  connect
the  other  end  of  the  positive  jumper  cable  to  the
positive (+) post of the charged battery. Connect one
end  of  the  negative  jumper  cable  to  the  negative  (-)
post  of  the  charged  battery.  Then  connect  the  other
end of the negative jumper cable to a solid, non-paint
coated  metal  part  of  the  engine  of  the  dead  loader,
as far from the dead battery as possible.

WARNING

Never bypass battery or connect

cables directly to starter motor.

Serious injury may occur due to

moving of the engine components

or loader. Also, engine may get

damaged.

CAUTION

Read Operator's Manual of the

vehicle that is giving auxiliary

power, in order to make sure that

the vehicle suited for the purpose.

The vehicle can get damaged

when

giving

auxiliary

starting

power.

Light bulbs

1.

Front lights

LED unit

2.

Work lights

LED unit

3

Road traffic headlights:

H7

Metal structures of the loader

Contact Avant service in case the steel

structure of the loader gets damaged. A

faulty reparation, or wrong methods and

materials used for reparation, can cause

hazardous failures or further damage the

loader.

In case the ROPS safety frame or the FOPS

canopy of the machine gets damaged, the

machine must be taken to Avant service for

checking. It is not allowed to repair the

ROPS and FOPS.

«
...
71
72
73
74
75
...
»

Содержание 225





















































































Отзывы:

Нет отзывов