AVANT 225 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 84

AVANT 225 Скачать руководство пользователя страница 4

Avant 220/225

4

.

Make sure all relevant manuals are available

DANGER

Wrong use of the equipment can cause death or severe injuries - Make sure to read

all relevant manuals and instructions thoroughly and keep them available for all

operators.

Using each attachment requires specific information about correct use, mounting

procedure, safety, and how to avoid hazardous situations. An attachment may introduce

risks that are not present when operating the loader with other kinds of attachments.

Always read the operator's manual of each attachment carefully.

Manuals of attachments

DANGER

Attachments can create significant risks that are not
covered by this Operator's manual of the loader.

Make sure you have all attachments manual available.
Wrong use of an attachment can cause serious injuries or
death.

Each attachment is accompanied by its own respective
Operator’s Manual. The manual will show important
information related to safety, and how to attach, use, and
maintain each attachment correctly.

Engine manual

Spare parts list

In

addition

to

this

Operator’s  manual  of
the  loader,  ensure  that
you  have  received  and
read  also  the  original
Engine

owner’s

manual.

The

instructions

concerning  the  engine
must  be  followed.  If
conflicting  information
is

found,

the

information  shown  in
the  Operator’s  Manual
of  the  loader  must  be
followed.

All spare parts of the loader are
listed  in  a  separate  spare  parts
list.  Engine  related  parts  are
listed  in  the  spare  parts  list  of
the engine.

«
...
2
3
4
5
6
...
»

Содержание 225





















































































Отзывы:

Нет отзывов