AVANT 225 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 84

AVANT 225 Скачать руководство пользователя страница 12

Avant 220/225

12

CAUTION

Silica dust warning.

Prolonged

exposure  to  crystalline  silica  can
cause  a  lung  disease  called
silicosis.  Occupational  health  and
safety  officials  recommend  limiting
exposure  to  dust  that is  present  at
most earth-moving and many other
work sites. Avoid spreading of dust
where  possible,  keep  loader  cabin
clean  from  dust,  use  respiration
mask when necessary.

Safety frame (ROPS) and safety

canopy (FOPS)

The loader is equipped with a Rolling Over Protective
Structure (ROPS) and a Falling Object Protective
structure (FOPS). These safety structures are
important parts of operator safety, and they must be
fitted on the machine.

Safety  frame  (ROPS)  protects  the  operator  in  case
the  machine  tips  over.  Fasten  seat  belt  while
operating  a  machine  with  a  ROPS.  All  cab  versions
are ROPS & FOPS tested and certified.

Crushing hazard - Always keep safety structures
installed

WARNING

Never

take

off

the

safety

structures, modify them, or attempt

to repair. If damaged, contact

service.

Always fasten the seat belt in order

to stay inside the protected area of

the safety frame.

Modifications

Any  modification  to  this  machine  must  be  approved
beforehand by an authorised Avant representative. If
you  modify  the  loader  or  attachment,  it  can  become
dangerous and cause serious injuries or even death.
Unauthorised  modifications  can  increase  the  risk  of
accidents  and  damage  or  shorten  the  service  life  of
the machine. Modifications to engine can make it no
longer compliant with emission regulations. Use only
original spare parts to make sure that the product  is
kept in safe operating condition.

«
...
10
11
12
13
14
...
»

Содержание 225





















































































Отзывы:

Нет отзывов