AVANT 225 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 84

AVANT 225 Скачать руководство пользователя страница 44

Avant 220/225

44

Steering of the machine

The machine is steered with the steering wheel. The
steering  wheel  is  hydraulically  powered.  A  practical
way of controlling the loader is to steer with  your left
hand  on  the  knob  of  the  steering  wheel.  This  way
your right hand is free to operate other functions.

In case the engine power is lost, turning the loader is
possible through the integrated back-up steering
system.

WARNING

When driving, always keep the

loader boom as low as possible.

Risk of tipping over increases

considerably when there is a heavy

load on the loader (a heavy

attachment or a big load in the

bucket) and the boom is up when

driving.

.

..

WARNING

Never use a high drive speed

when turning. In particular: when

the loader boom is up the stability

of the machine is much weaker

when turning.

.

..

WARNING

Always

remember

that

when

turning the driver´s seat extends

beyond the turning radius of the

wheels. Stay and keep hands and

feet inside the safety frame (risk of

collision and crushing).

.

..

In case the machine tips over

Avoid tipping over of the loader with careful operation
and the instructions given throughout this manual.
However, it is important to know what to do in case
the machine tips over.

WARNING

Stay within the space protected by

the ROPS safety frame. Always

keep seat belt on to stay on

driver's seat and to avoid getting

crushed between ground and a

loader that tips over.

In case the loader tips over

Shut

down

the

loader

engine

immediately  and  disconnect  battery
by  turning  the  main  switch  to  OFF
position.  A  running  engine  of  an
overturned  loader  will  get  damaged
quickly and will spill hydraulic oil.

As  soon  as  possible,  lift  the  loader
back  on  its  wheels  to  prevent  spilling
of fuel, and engine and hydraulic oils.
The  loader  can  in  many  cases  be

lifted back on its wheels by having a
few persons to lift from the ROPS
frame.

To prevent severe engine damage, do
not  attempt  to  restart  an  overturned
loader  before  oil  is  drained  from  the
cylinders  and  thorough  inspection  of
possible damages. Contact service.

«
...
42
43
44
45
46
...
»

Содержание 225





















































































Отзывы:

Нет отзывов