AVANT 225 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 84

AVANT 225 Скачать руководство пользователя страница 34

Avant 220/225

34

.

Engine compartment

To access the engine, unlock the seat base by
pulling the lever under the seat forward and tilt the
seat forward:

1.

2.

WARNING

Allow engine to cool before

accessing the engine. Engine and

exhaust parts may be extremely

hot after use.

The adjacent warning label is

located on the engine. Hot areas

include the engine in general, and

especially its exhaust pipe(s) and

surrounding areas.

CAUTION

Be careful when handling the seat

base and keep hands and fingers

clear when lifting or lowering -

uncontrolled

movements

may

crush or cut.

WARNING

Shut off engine and allow it to cool

before

accessing

engine

compartment. Moving or rotating

parts may injure.

Battery disconnect switch

The loader is equipped with a battery disconnect
switch (main switch). The switch is located under the
driver's seat in the engine compartment, on the left
hand side.

Battery  disconnect  switch  cuts  the  current  between
battery  and  the  rest  of  the  electric  system.  Always
switch  off  main  current  when  the  loader  is  not  used
for  a  longer  period  of  time  in  order  that  the  battery
doesn't get empty, or when servicing the machine.

Trailer coupling

The loader is equipped with a 50 mm ball hitch type
trailer coupling for towing of light trailers.



Max. allowed vertical load 2000 N



Maximum towing load is 3000 N.

«
...
32
33
34
35
36
...
»

Содержание 225





















































































Отзывы:

Нет отзывов