AVANT 225 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 84

AVANT 225 Скачать руководство пользователя страница 48

Avant 220/225

48

Transporting instructions and

tie down points

Before transporting or lifting mount the articulation
frame lock,

see page 59. Lower the boom down

and disconnect battery.

Remember to remove the frame lock after transport.

Tie down points

There are a total of 4 tie down points:

Two on the front frame close to the boom:

Two on the rear frame, near rear counterweight:

It may be necessary to tie down attachments
separately. Make sure all equipment is secured also
before just a short transport.

Lifting

The loader can be lifted by mounting appropriate
lifting slings on the ROPS frame. Lifting kit A418706
includes all necessary parts to lift the loader, contact
your dealer.

Before lifting, heavy attachment and possible extra
weights must be removed. Mount the frame lock on
the machine.

Make  sure  that  the  lifting  slings  cannot  move  and
that  the  machine  doesn't  swing  during  lifting.  Loop
the  lifting  straps  around  all  four  ROPS  posts  and
make sure they  are  not tied or get damaged  by  e.g.
sharp  corners.  Follow  the  instructions  given  in  the
operator’s manual of the lifting slings. To lift a loader
that  is  equipped  with  the  Cab  L,  the  front,  side,  and
rear window panels must be removed first.

WARNING

Lower the boom and mount the

articulation frame lock,

see page

59. Remove any heavy attachment

and extra counterweights before

lifting. Never lift a loader with

persons riding the machine.

Towing (retrieval of the machine)

The hydrostatic drive system of the loader makes it
impossible to tow the loader without special
arrangements.

If absolutely necessary, the loader can be towed with
a rigid tow bar, by releasing the hydraulic drive
circuit. Maximum allowed towing speed is 3 km/h,
and towing distance 200 m

WARNING

When the drive circuit is released

for towing, the drive motors do not

provide any braking force and the

loader

could

start

moving

unexpectedly. Before releasing the

drive circuit, make sure that the

parking brake has been engaged,

and release the parking brake only

after a rigid tow bar has been

connected.

«
...
46
47
48
49
50
...
»

Содержание 225





















































































Отзывы:

Нет отзывов