AVANT 225 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 84

AVANT 225 Скачать руководство пользователя страница 51

Avant 220/225

51

Working with attachments

.

..

Requirements for attachments

Any attachment mounted on the loader must meet applicable safety and technical standards and requirements. An
attachment that is not specifically designed for the loader may cause unsafe operation; make sure that Avant
220/225 is specifically listed in the operator's manual of the attachment. Some attachments may require the use of
special protective guards or personal safety equipment.



Read Operators Manual of the attachment before starting operation. Make sure

that the attachment is compatible with the loader. Contact your Avant dealer if

necessary.



Make sure that the attachment is connected properly on the attachment coupling

plate, and that it is being used in accordance with the instructions in the

Operators Manual. Follow instructions regarding personal protective equipment

and safety distances.



Put the attachment down on the ground and stop the engine before leaving

driver’s seat. Familiarise yourself with the operation and stopping of the

attachment at a safe place. Follow service instructions.

Check max. allowed hydraulic oil flow for the attachment. Adjust engine revs so that they
are suitable for the work and the attachment.

Manuals of attachments

DANGER

Attachments can create significant risks that are not
covered by this Operator's manual of the loader.

Make sure you have all attachments manual available.
Wrong use of an attachment can cause serious injuries or
death.

Each attachment is accompanied by its own respective
Operator’s Manual. The manual will show important
information related to safety, and how to attach, use, and
maintain each attachment correctly.

«
...
49
50
51
52
53
...
»

Содержание 225





















































































Отзывы:

Нет отзывов