AVANT 225, Руководство оператора, Страница: 37 / 84

Avant 220/225
37
.
Lights
Work lights
The loader is equipped with standard work lights at
the front of the loader, which are controlled with a
switch near the ignition switch.
If the loader is equipped with the optional road traffic
light kit, the standard work lights are replaced with
road headlights.
Extra work light kit (option)
The loader can be equipped with extra work lights,
making it easier to work in low light. The lights are
operated with the switch on the control panel (
see
page 30).
Headlight, beacon, blinker & reflector
kit (option)
This optional equipment enables road traffic
registration in certain countries. Requirements for
road traffic use vary in different countries, please
consult your local AVANT dealer.
Warning beacon (option)
The beacon can be removed quickly by loosening its
retaining screw and then by pulling the beacon out.
Place the protective seal on the beacon stand to
prevent
water entering and damaging the
connectors. Handle beacon with care. The beacon is
sealed and its inner components cannot be replaced
or repaired by user.
Beacon includes high-voltage
components. Do not use or repair
damaged beacon, replace with new
one.
Light control switch (road traffic light
kit)
Loaders fitted with road traffic light kit have a
multi-function control switch fitted to the steering
column.
The switch has the following controls:

Headlights

High beam lights

Signal horn (duplicate switch, both the switch on
near the ignition key and switch on multi-function
control are connected)

Indicator turn lights